JinSeal Manufactures and Supplies Various Kind of Sealing Gaskets Included Metallic Gaskets Like Ring Type Joint Gasket, Lens Gasket and Semi-metallic Gasket Like Spiral Wound Gasket, Kammprofile/Cammprofile Gasket, Double Jacketed Gasket,
Semi-metallic Gaskets Are Made Up of a Metal Material with a Non-metallic Material. Spiral Wound Gasket, Kammprofile Gasket, Corrugated Gasket, Double Jacketed Gasket.
Its Sealing Element is Comprising of a Spiral Wound V or W Shaped Stainless Steel Strip and a Non-metallic Filler Material in Graphite, Ptfe, Asbestos Free, Mica, Ceramic. Etc, Always It Has an Outer Ring or Called Center Ring Which Can Minimize the Risk of Material Creep Through Over-tightening. for Some Critical Applications, Spiral Wound Gaskets Are Also Required an Inner Ring to Protect the Windings from Contamination and Give the Gasket a Greater Resistance to Thermal Shock. Some Spiral Wound Gaskets with Inner Rings Are Also with Bars Which Can Be Found in Heat-exchanger, Shell, Channel, and Cover-flange Joints. Spiral Wound Gaskets Without Inner Rings and Outer Rings Are Suitable for Tongue-and-groove Flange.
It is a Solid Metal Ring with Concentric Grooves While a Filler Material, Usually Graphite and PTFE are Applied on Both Sides. It is Much More Expensive Than Spiral Wound Gaskets but Provides Better Blowout Resistance and Easy to Handle Even in Large Diameters. Kammprofile Gaskets Are Better for High-Pressure Environment.
It is Made of a Thin Stainless Steel Tape Compressed by a Tool to Form Concentric Corrugations and then Non-metallic Filler Like Graphite, Asbestos Free or Ptfe Will Be Applied on Both Sides. It Cannot Withstand Much Pressure Compared to Kammprofile Gaskets.
It is Also Called As Metal Jacketed Gaskets, and a Soft Material in Graphite or Asbestos or Ptfe or Ceramic Will Be Enclosed in a Thin Stainless Steel Jacket. There Are Different Ways to Cover the Non-metallic Filler As Well As Different Sizes and Shapes. the Gaskets Are Commonly Used in Heat Exchangers and Valves. It Can Be a Replacement of the Spiral Wound Gaskets Without Inner and Outer Ring at a Lower Cost.
Metal Gaskets Are Manufactured from a Metallic Material Such As Soft Steel, Carbon Steel, Stainless Steel, Monel, Duplex Stainless Steel and Inconel.
RTJ Gaskets Are Used in High-Pressure Class Flanges As Well As for High-Temperature Environment. and High-tension Bolting is Required when Using Ring Type Joints.
RTJ Gaskets Are Machined to Fit in a Groove on the Flange to Provide the Seal Function. Always Api Ring Joint Gaskets Come in Two Basic Types-oval and Octagonal Type, the Octagonal Type Has a Better Sealing Efficiency Than the Oval Type As It’s a Face to Face Sealing Way. While Only the Oval Type Joints Can Be Used for Old Type Flanges.
Besides Oval and Octagonal Types, There’re Also BX and RX Ring Joint Gasket Which Are Used in Api 6B and API 6B Flanges and Are Designed for Pressure Up to 15000 Psi. As for SRX and SBX Type Ring Joints Are Used for Sub-sea Environment, and These Types Are with Three Vent Holes with Which Any Water Trapped Between a Ring Groove Bottom and the Sealing Area of the Gasket Can Be Escape to the Equipment I.d. Bore. Usually JinSeal Also Provides Lens Gasket and IX Rings. Ring Type Joints Gaskets Are Manufactured According to Asme B16.20, API Standards. Customized Gaskets Are Also Available.
